Min Max RSI – Екілік Options көрсеткіштері

Екілік опциялар брокерлерінің рейтингі 2020:

The Freelancer MAX FROM

DISCLAIMER: These are our current vehicle specifications. Some of this may change during the 3D design and game balancing process.

Media

The MISC Freelancer MAX

Weapons Loadout – Kroneg FL-33 (Subject to change)

Weapons Loadout – Twin Behring V82-FL Rear Turret

Technical overview

Freelancer MAX

Model

Focus

Description

The Freelancer MAX variant is for those who prize increased cargo capacity over everything else. Combine that additional storage with MISC’s unrivaled dependability and reputation, and you can see why the MAX is the preferred transport for many independent haulers in Empire today.

6 Ways to Get Maximum Gain from RSI Indicator

Trading community de facto applies RSI indicator to define levels of overbuying/overselling levels on market. Even without use of additional filters, indicator works good. Have a look on applying RSI that even more increase accuracy of the indicator.

Standard way to apply RSI:

The first, traditional way – buying option at the moment when RSI exits the zone of overbuying/overselling.

Екілік опциялар брокерлерінің рейтингі 2020:
  • when the value of RSI line gets lower than overselling level of 30% usually, bears force weakens and that means, the exit of an indicator from this zone is the right time to open position for raising;
  • when values get higher than overbuying level of 70% usually, one needs to consider variants of entering on downturn.

Buying option is an operation strictly to be provided only by the moment when indicator exits overselling/overbuying zone.

RSI on minor timeframes

2nd way. If you trade turbo options or binaries with expiration time less than 30minutes, 70 and 30 levels not always allow to execute accurate enterings. Period should be decreased for indicator to reach its extreme values more frequent. For timeframe less than hour one may usel RSI equals 5 and 90 to 10 or even 95 to 5 levels.

Example of setting Rsi to 90/10 and 5 period:

RSI with period of 5 on 1 minute chart

3rd way. For additional approval you need to pay attention on higher period in order to see the global trend. Trading binary options opposing the trend is the bad idea, thus signal direction on current timeframe and one above must match together.

That is how signal approve looks on 1 minute and 5 minute charts:

RSI on longer timeframe M5 approves signal on chart M1

Period and levels of RSI should match together on both charts.

4th way. There is scalping technique for supershort deals. This trading method is being frequently applied by american traders. The feature of the strategy is to get large amount of signals during a small period of time. The main goal is to absolutely minimize response time of an indicator.

  • RSI period equals 2 bars;
  • Overbuying limits are also set maximally possible – 99 for overbuying and 1 for overselling.

As usual, this strategy is used on chart M1 or M5. Expiration time of binary option usually does not exceed 5 minutes.

Setting RSI for scalping

RSI Divergence

5th way – searching for divergence on chart is an effective method of getting RSI signals. Divergence is a dissimilarity between chart and indicator values, for example when the chart draws higher and indicator shows lower maximum.

The example of divergence – two maximums on chart are on the same level while on the indicator chart the second maximum is much higher:

The thing to remember – you need to trust exactly what indicator shows, if it grows – we buy option CALL, if it decreases – PUT.

RSI divergence types

The example of entering the position on the basis of RSI divergence:

entering the position on the basis of RSI divergence

RSI & Bollinger Bands

The last, 6th way – to combine RSI indicators and Bollinger Bands, because the first one shows impulsive movements and the second shows the main direction of market movement. As a result we get very precise signals on entering the position.

The rules of trading on RSI are fairly standard. Purchase PUT option by the time indicator line exits the overbought zone, or CALL option, when indicator line exits the oversold zone. But one should enter only in case the price is situated near the bottom line of Bollinger Bands, which should act as a filter. Ideally, the price should exactly overcross the line by the moment of receiving RSI signal.

In case of Сall signal, the price of opening the breakout candlestick should be above the line. The closing price above:

СALL signals with Bollinger bands filter

All the same is true for PUT-signal, in this case the price therewith should simultaneously cross the top line of a channel – Opening price higher, closing price lower (inside the channel):

PUT signals with Bollinger bands filter

The expiration time may vary depending on used timeframe. Ideally, the expiration time should be equal to quantity of bars needed to achieve the floating average (average line of the channel) from the edges of the channel. One may calculate the average quantity of bars needed to pass the distance from one edge to another and divide it by 2.

Conclusion

The most famous and widespread indicators are able to become the basis of profitable trading strategy if one uses it properly. We discussed several simple ways of increasing the percentage of succesul deals through the traditional RSI strategy. Try to use these methods on free practice account.

Traditional indicator have become so merged into the trader’s lives, that many just don’t consider them as the serious trading instrument. At the same time, the majority of more up-to-date developments are based on the same RSI or floating averages. The primary benefit of RSI is its versatility, this indicator might be used on currency pairs, trade stocks or goods with equal success and without loss of quality.

NOTE: This article is not an investment advice. Any references to historical price movements or levels is informational and based on external analysis and we do not warranty that any such movements or levels are likely to reoccur in the future.
In accordance with European Securities and Markets Authority’s (ESMA) requirements, binary and digital options trading is only available to clients categorized as professional clients.

GENERAL RISK WARNING

CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage.
87% of retail investor accounts lose money when trading CFDs with this provider.
You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money.

Algorithm Reference

Indicators

Indicators

Introduction

We provide more than 100 technical indicators for you to use in your algorithm. These are provided in two ways: through helper short cut methods, and as class objects. Indicators created through the short cut methods have already been wired up to receive data and are «ready to use». A full list of the indicators and their properties can be found in the reference table below.

One key indicator to learn is the Identity indicator, which simply returns the value of the asset. This can be useful for combining indicators. For example:

Indicator Ready

Indicators are not ready when you first create them. The length of time it takes to trust the indicator values depends on the indicator period. In QuantConnect, we provide a shortcut to check the indicator status. indicator.IsReady will return true when the indicator is ready to be used. eg. IsReady

Initializing Indicators

You can use two methods to prime technical indicators and get them ready to be used.

Algorithm Warm-Up

When we set an algorithm warm-up period, the engine pumps data in and automatically update all the indicators from before the start date (see Setting Warm Up Period). To ensure that all the indicators are ready after the algorithm warm-up period, you need to choose a lookback period that contains the required data.

Universe Selection does not support warm-up and, consequently, factors that depend on indicators are not updated.

History Request Warm-Up

Alternatively, we can request for historical data to update the indicator manually (see Historical Data Requests).

Basic Indicator Usage

QCAlgorithm provides a shortcut method for each indicator available. Each method creates an indicator object, hooks it up for automatic updates, and returns it to be used in your algorithm.

You can determine the specific requirements of the indicator from the reference table below.

The indicator resolution can be different from the resolution of your securities data. However, the resolution of the indicator should be equal to or higher than the resolution of your security. In most cases, this usage should be in the Initialize method. If you call this method several times, it will create a new indicator that is not ready to use.

The indicator object can be implicitly used as a decimal.

To retrieve the numerical value of any indicator, you can use the Current.Value attribute of the indicator.

Custom Period Indicators

You can create an indicator object that is not bound to any automatic update and choose which data it should use. To use an indicator like this, you create an indicator with its constructor.

To see the LEAN indicator classes available and their constructor arguments, please look them up in the reference table below.

You can use two methods to update the indicator: automatic or manual.

Automatic Update

In this method, you will recreate the basic indicator usage: create an indicator with its constructor and register the indicator for automatic updates with the RegisterIndicator() method.

Other than the available resolutions, you can also update the indicator with the consolidator. For details about data consolidator, please see Consolidating Data.

Manual Update

Updating your indicator manually allows you to control which data is used and create indicators of other non-price fields. For instance, you can use the 3:30 pm price in your daily moving average instead of the after-market closing price, or you may want to use the maximum temperature of the past 10 cloudy days.

The indicator objects have the Update() method that updates the state of an indicator with the given value. Depending on the different types of indicators, this value can be the time/decimal pair, a trade bar, a quote bar, or a custom data bar.

With this method, the indicator will only be ready after the Update() method has been used to pump enough data. For example, a 10-period daily moving average needs to receive ten daily data points through the Update() method.

In both cases, we recommend using historical data to warm up your indicator as demonstrated in Initializing Indicators.

Updating Indicators with Custom Values

The data point indicators use only a single price data in their calculations. By default, those indicators use the closing price. For equity, that price is the trade bar closing price. For other asset classes with quote bar data (bid/ask price), those indicators are calculated with the mid-price of the bid closing price and the ask closing price.

If you want to create an indicator with the other fields like Open , High , Low , or Close , you can specify the selector argument in the indicator helper method with the available fields.

You can also apply RegisterIndicator to register the price data with the specified field.

Reference Table

Creates a new Acceleration Bands indicator.

Creates a new AccumulationDistribution indicator.

Creates a new AccumulationDistributionOscillator indicator.

Creates a new Average Directional Index indicator. The indicator will be automatically updated on the given resolution.

Creates a new AverageDirectionalMovementIndexRating indicator.

Creates a new ArnaudLegouxMovingAverage indicator.

Creates a new AbsolutePriceOscillator indicator.

Creates a new AroonOscillator indicator which will compute the AroonUp and AroonDown (as well as the delta)

Creates a new AroonOscillator indicator which will compute the AroonUp and AroonDown (as well as the delta)

Creates a new AverageTrueRange indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new BollingerBands indicator which will compute the MiddleBand, UpperBand, LowerBand, and StandardDeviation

Creates a new Balance Of Power indicator. The indicator will be automatically updated on the given resolution.

Initializes a new instance of the CoppockCurve» indicator

Creates a new CommodityChannelIndex indicator. The indicator will be automatically updated on the given resolution.

Creates a new ChandeMomentumOscillator indicator.

Creates a new Donchian Channel indicator which will compute the Upper Band and Lower Band. The indicator will be automatically updated on the given resolution.

Creates a new Donchian Channel indicator which will compute the Upper Band and Lower Band. The indicator will be automatically updated on the given resolution.

Creates a new DoubleExponentialMovingAverage indicator.

Creates a new DetrendedPriceOscillator» indicator.

Creates an ExponentialMovingAverage indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates an FractalAdaptiveMovingAverage (FRAMA) indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new HullMovingAverage indicator. The Hull moving average is a series of nested weighted moving averages, is fast and smooth.

Creates a new IchimokuKinkoHyo indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new KaufmanAdaptiveMovingAverage indicator.

Creates a new Keltner Channels indicator. The indicator will be automatically updated on the given resolution.

Creates a new LogReturn indicator.

Creates and registers a new Least Squares Moving Average instance.

Creates a new LinearWeightedMovingAverage indicator. This indicator will linearly distribute the weights across the periods.

Creates a MACD indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new MeanAbsoluteDeviation indicator.

Creates a new Mass Index indicator. The indicator will be automatically updated on the given resolution.

Creates a new Maximum indicator to compute the maximum value

Creates a new MoneyFlowIndex indicator. The indicator will be automatically updated on the given resolution.

Creates a new MidPoint indicator.

Creates a new MidPrice indicator.

Creates a new Minimum indicator to compute the minimum value

Creates a new Momentum indicator. This will compute the absolute n-period change in the security. The indicator will be automatically updated on the given resolution.

Creates a new Momersion indicator.

Creates a new MomentumPercent indicator. This will compute the n-period percent change in the security. The indicator will be automatically updated on the given resolution.

Creates a new NormalizedAverageTrueRange indicator.

Creates a new On Balance Volume indicator. This will compute the cumulative total volume based on whether the close price being higher or lower than the previous period. The indicator will be automatically updated on the given resolution.

Creates a new PercentagePriceOscillator indicator.

Creates a new Parabolic SAR indicator

Creates a new RegressionChannel indicator which will compute the LinearRegression, UpperChannel and LowerChannel lines, the intercept and slope

Creates a new RateOfChange indicator. This will compute the n-period rate of change in the security. The indicator will be automatically updated on the given resolution.

Creates a new RateOfChangePercent indicator. This will compute the n-period percentage rate of change in the security. The indicator will be automatically updated on the given resolution.

Creates a new RateOfChangeRatio indicator.

Creates a new RelativeStrengthIndex indicator. This will produce an oscillator that ranges from 0 to 100 based on the ratio of average gains to average losses over the specified period.

Creates an SimpleMovingAverage indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new StandardDeviation indicator. This will return the population standard deviation of samples over the specified period.

Creates a new Stochastic indicator.

Creates a new Stochastic indicator.

Creates a new Sum indicator.

Creates Swiss Army Knife transformation for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new T3MovingAverage indicator.

Creates a new TripleExponentialMovingAverage indicator.

Creates a new TrueRange indicator.

Creates a new TriangularMovingAverage indicator.

Creates a new Trix indicator.

Creates a new UltimateOscillator indicator.

Creates a new Variance indicator. This will return the population variance of samples over the specified period.

Creates an VolumeWeightedAveragePrice (VWAP) indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates an VolumeWeightedAveragePrice (VWAP) indicator for the symbol. The indicator will be automatically updated on the given resolution.

Creates a new Williams %R indicator. This will compute the percentage change of the current closing price in relation to the high and low of the past N periods. The indicator will be automatically updated on the given resolution.

Creates a WilderMovingAverage indicator for the symbol. The indicator will be automatically updated on the given resolution.

Indicators Usage
AccelerationBands

Creates a new CandlestickPatterns.TwoCrows» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeBlackCrows» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeInside» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeLineStrike» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeOutside» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeStarsInSouth» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ThreeWhiteSoldiers» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.AbandonedBaby» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.AdvanceBlock» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.BeltHold» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Breakaway» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ClosingMarubozu» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ConcealedBabySwallow» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Counterattack» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.DarkCloudCover» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Doji» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.DojiStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.DragonflyDoji» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Engulfing» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.EveningDojiStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.EveningStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.GapSideBySideWhite» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.GravestoneDoji» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Hammer» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.HangingMan» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Harami» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.HaramiCross» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.HighWaveCandle» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Hikkake» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.HikkakeModified» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.HomingPigeon» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.IdenticalThreeCrows» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.InNeck» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.InvertedHammer» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Kicking» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.KickingByLength» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.LadderBottom» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.LongLeggedDoji» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.LongLineCandle» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Marubozu» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.MatchingLow» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.MatHold» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.MorningDojiStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.MorningStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.OnNeck» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Piercing» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.RickshawMan» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.RiseFallThreeMethods» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.SeparatingLines» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ShootingStar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.ShortLineCandle» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.SpinningTop» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.StalledPattern» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.StickSandwich» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Takuri» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.TasukiGap» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Thrusting» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.Tristar» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.UniqueThreeRiver» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.UpsideGapTwoCrows» pattern indicator. The indicator will be automatically updated on the given resolution.

Creates a new CandlestickPatterns.UpDownGapThreeMethods» pattern indicator. The indicator will be automatically updated on the given resolution.

Indicator Extensions

Indicators are composable – meaning they can be chained together to create unique combinations much like lego blocks. We support several indicator extensions as outlined below:

Of extension helper for MIN method, get min in i-samples.

Candlesticks Patterns Usage
TwoCrows

Of extension helper for MIN method, get min in i-samples.

Plotting Indicators

We provide a helper method which aims to make plotting indicators simple. For further information on the charting API please see our Charting section.

Note that not all indicators share the same base type(T) so may not work together as some indicators require points where others require TradeBars.

You can also see our Tutorials and Videos. You can also get in touch with us via Chat.

Екілік опциялар брокерлерінің рейтингі 2020:
Ақшаны қайда салу керек?
Пікір үстеу

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: