Harami MA RSI MACD Binary Options Indicator – Екілік Options көрсеткіштері

Екілік опциялар брокерлерінің рейтингі 2020:

HLOC Indicator – more 90% ITM on binary options

HLOC Indicator does not include any known indicators such as MA, RSI, MACD, etc. This indicator is completely based on mathematical calculations. It is unique in its kind! As it does not make assumptions, but completely comes to the situation on the market by mathematical calculations. It can work in any market with the appropriate settings. The indicator has a built-in tester , which is very helpful to quickly analyze the performance of the indicator for a particular currency pair with different trading methods (with a different number of martingale steps).

Characteristics of the HLOC Indicator
  • Platform: Metatrader4
  • Asset: Major currency pair
  • Trading Time: Around the clock
  • Timeframe: M5 or H1
  • Expiry: 3 candles (15 min for M5 and etc.)
  • Recommended broker: Binomo, Binary, IQOption
Rules of trade by HLOC Indicator

HLOC Indicator signals are simple and intuitive: up arrow – Call, down arrow – Put. Open the position ONLY on the next candle if the arrow has not disappeared:

p, blockquote 3,0,0,0,0 –>

An arrow appears during signal generation. Naturally, while the candle is not closed, the arrow may disappear and appear, as with any normal indicator. The arrow appears-disappears because of the condition close to entering the position, but not sufficient.

p, blockquote 4,0,0,0,0 –>

If after closing the candle the arrow has not disappeared, then we enter the deal. If the arrow has disappeared, then do not enter, then the condition has not come as it should.

There are not very many signals, so for those who like more rhythmic trading, I recommend installing the template on several currency pairs at once:

p, blockquote 6,0,0,0,0 –>

Екілік опциялар брокерлерінің рейтингі 2020:

p, blockquote 7,0,1,0,0 –>

The HLOC Indicator settings have two sections:

p, blockquote 8,0,0,0,0 –>

  • Indicator settings
  • Tester settings

p, blockquote 9,0,0,0,0 –>

Bar – period of analysis of a candles. According to the value of this parameter, the indicator analyzes the specified number of candles. The optimal period is from 10 to 50. The smaller the value, the more signals. For aggressive trading 10, for the conservative (best) 20-25.

p, blockquote 10,0,0,0,0 –>

Trend_Bar – trend analysis. This parameter is determining the direction of movement of the currency. The optimal values are from 3 to 7.

p, blockquote 11,0,0,0,0 –>

Optimal settings with the best results:

p, blockquote 12,0,0,0,0 –>

  1. Bar – 10, Trend_Bar – 3
  2. Bar – 15, Trend_Bar – 4
  3. Bar – 21, Trend_Bar – 5

In addition, you can choose individual settings for each currency pair, this can be done in the tester settings. This is a unique tester that can show the results of your settings on the history both in a year (depending on the maximum quotes history in your terminal) and in 1 hour.

p, blockquote 13,0,0,0,0 –>

Tester – enable tester.

p, blockquote 14,0,0,0,0 –>

Start_Date – test start date.

p, blockquote 15,1,0,0,0 –>

End_Date – test end date (the default is 2020, that is, testing will be performed to date).

p, blockquote 16,0,0,0,0 –>

Expiration – this parameter allows you to calculate the situation with any expiration time. That is, if you conduct a test on the M1 timeframe and want to make bets with the expiration of 3 candles (3 minutes), then set the number “3”, and the tester will calculate the result by 3 candles after the signal.

p, blockquote 17,0,0,0,0 –>

Martingale – this parameter allows calculations to be made using the Martin Gale method. For a more accurate calculation you can use Binary Options Martingale Calculator.

p, blockquote 18,0,0,0,0 –>

0 – not used martingale. 1 deal.

p, blockquote 19,0,0,0,0 –>

1 – 1 deal + 1 martingale step, total result with 2 deals.

p, blockquote 20,0,0,0,0 –>

2 – 1 deal + 2 martingale step, total result with 3 deals, etc.

p, blockquote 21,0,0,0,0 –>

Time_Start – test start hour.

p, blockquote 22,0,0,1,0 –>

Time_End – test end hour.

p, blockquote 23,0,0,0,0 –>

Step_arrow – indentation of arrows from candles.

p, blockquote 24,0,0,0,0 –>

Alert_MT4 – notification in MT4.

p, blockquote 25,0,0,0,0 –>

Alert_Email – notification to the Email.

p, blockquote 26,0,0,0,0 –>

Alert_Mobile – notification on your phone.

p, blockquote 27,0,0,0,0 –>


p, blockquote 28,0,0,0,0 –>

  1. Do not use the martingale method with step of more than 1.
  2. Do not trade for half an hour before and after the release of important economic news.
  3. Skip the following signal after a loss:
  4. Trade only during the flat. At the moment, the indicator shows the best results in the low-volatile market.
  5. Be sure to practice on a demo account before starting a real trade.

What is a Moving Average? An Easy Way to Set up and Use in Trading

The moving average (MA) is the most popular technical analysis tool on the IQ Option platform, and for a good reason — it is both simple and effective. Do you know what is a moving average and how to use it in trading?

The moving average is based on past prices and can be categorized as a trend-following indicator. It measures average price for a particular trading instrument over a specified time period.

Its main function is to reduce the price noise and smooth out the price action. In practice, the general idea behind the indicator can be represented by four different types of it: simple moving average (SMA), weighted moving average (WMA), exponential moving average (EMA) and smoothed simple moving average (SSMA).

The two most commonly used variations of the moving average are simple moving average and exponential moving average. While SMA is a simple average of the asset prices over a set period of time, EMA prioritizes more recent prices by assigning them with bigger weights. WMA gives the highest importance to the most recent candlestick, too. SSMA does not concentrate on a specific period and is rarely used in trading.

SMA (orange) and EMA (yellow) with a period of 14 over a price chart

How to set up?

Here is what you want to do in order to set up the indicator in the IQ Option platform:

  1. Click on the “Indicators” button in the bottom left corner of the screen, then pick “MA”.

Setting the indicator. Step one

  1. Switch to the “Set up & Apply” tab.

Setting up the indicator. Step two

  1. Choose the desired MA type, adjust the time period and click “Apply”.

As a rule, a simple moving average with a longer time period is used to determine long-term trends, while short-term trends can be caught with a shorter period EMA. Short-term EMA will look choppier, long-term SMA looks smoother.

How to use in trading

Despite being a basic technical analysis tool the moving average has a lot of practical applications in trading.

The most common one is to identify the existing trend. By smoothing the price action and reducing the noise the moving average lets the trader look at the real picture behind random price fluctuations (the so-called price noize).

The MA can also be used as a dynamic support and resistance line . When the price touched the moving average from below, the trader may want to sell the asset. When the asset price touches the moving average from above, it may be wise to consider buying the asset.

Defining entry points with the help of the MA

More than that, some quite sophisticated indicators such as Bollinger Bands, MACD and the McClellan Oscillator are based on moving averages.


Being an indicator that is based on past performance of the price action, the moving average cannot adequately predict neither future direction of the trend, nor its strength. All of the above doesn’t, of course, mean that MA is useless. By analyzing the past, we can receive the information that is necessary for future predictions. In other words, the MA cannot make an accurate forecast, but it can help us make the forecast ourselves.

The moving average is a simple yet powerful tool and comes in many forms. Each of them is best suited to fulfil its own task. Don’t let the simplicity of the moving average fool you, this indicator needs a lot of practice to be used effectively.

NOTE: This article is not an investment advice. Any references to historical price movements or levels is informational and based on external analysis and we do not warranty that any such movements or levels are likely to reoccur in the future.
In accordance with European Securities and Markets Authority’s (ESMA) requirements, binary and digital options trading is only available to clients categorized as professional clients.


CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage.
87% of retail investor accounts lose money when trading CFDs with this provider.
You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money.

60 RSI, ATR and SMA Trading System

Submit by Janus Trader 20/12/2020

Time Frame 4 H or Higher

Currency Pairs: any

RSI (8), with (EMA 8 and ATR 20)

Long entry rules

Enter your long trade when the RSI crosses its moving average. We BUY when RSI crosses the moving average from below (red box and line). It is vital to note that a cross is only validated after the daily candle has closed. We don’t take a trade on the day when the cross has formed as it may disappear later in the day.

We enter the trade as soon as the new candle is formed i.e. at the opening price.

Short entry rule

Enter your short trade when the RSI crosses its moving average. We SELL when RSI crosses the moving average from above (blue box and line). It is vital to note that a cross is only validated after the daily candle has closed. We don’t take a trade on the day when the cross has formed as it may disappear later in the day.

We enter the trade as soon as the new candle is formed i.e. at the opening price.

Stop loss

We will use the percentage of the ATR (Average True Range) as stop loss level. The ATR shows

numerically volatile a currency has been recently. A small ATR (30-50 pips) shows the daily

ranges have been small, this currency pair is moving very little. A higher ATR (100-200 pips)

shows a currency pair on a rollercoaster ride, either in a strong trend or ranging wildly.

Obviously for a high ATR we need a bigger stop to give the trade some room to breathe. The

ideal stop loss level is a stop of 75% ATR(20)

Exit trade

No rules for exit in this method. You can just let the trade run for as long as you wish with a moving stop loss or lose the trade at the end of the day.

Long Trades Examples

In this example, the EUR/USD was traded. When the cross happened on this day, we just

waited for the next day and entered our long position at the opening. The ATR value at the

time we entered our trade was 0.0145 which means 145 pips, so our stop loss level was set at

0.75 x 145 = 109 pips below the entry point. This trade was going up in out favor direction and

ran for 14 days when it was closed. The profit was 1500 pips

Short Trades

Example 1

In this example, the EUR/USD was traded. When the cross happened on this day, we just

waited for the next day and entered our short position at the opening. The ATR value at the

time we entered our trade was 0.0158 which means 158 pips, so our stop loss level was set at

0.75 x 158 = 119 pips above the entry point. This trade was going down in out favor direction

and ran for 4 days when it was closed. The profit was 1230 pips

Екілік опциялар брокерлерінің рейтингі 2020:
Ақшаны қайда салу керек?
Пікір үстеу

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: